May 2006 Editor: Tom Gillard
12-May-06
Please remember, in your thoughts and prayers, all our Troops around the
world and those on the way home.
***ATTENTION MEMBERS***
Our Club Officers are:
Commodore Vice-Commodore
Harbormaster
Port Captain
Secretary
Treasurer
Lucian Cayce
Andy Myrick
Harry Bloodsworth
John Garibotte
Theresa Higgins Debbi Merrill
Larry Thomas
Spring Regatta: May 20-21 (see the web page for more details)
Held in conjunction with the
Dixie Inland Yacht Racing Association
(DIYRA)
Portsmouth Championship
Independence Day: Tuesday (7-4)
Fall Regatta: Sept 16-17
Supper starts around 6:00pm
Meeting starts at 7:00pm at the HYC site.
Knots are used by many people everyday, and sailors should
have a basic knowledge of some of the most popular ones.
Here are two that you can practice this month.
Sunday Series:
Don't forget to come out and race. A schedule
is on the web site. Click HERE
Contact David Ranstrom if you have
questions.
Here are some of the basic rules that
are needed while you are on the water
Matt & Dixie as they cross the finish line to win 23-April races
In pursuit of docklines that do not stiffen with age, BoatUS has developed
a pre-cut dockline twisted from a special stretchy polyester. This is
a brand new product, too new to evaluate, but with this one exception, you
can skip right over rope that is labeled polyester or Dacron or Kevlar or
Spectra or any other fancy name. For making up docklines you want plain old
nylon.
Nylon has three characteristics that make it ideal for dockline.
It is incredibly strong, it is very stretchy, and it resists the harmful
effects of sunlight better than any of those fancy-name synthetics.
The value of strength is self-evident, but the benefits of elasticity
may not be as obvious. When your boat surges against an unyielding dockline,
the load on the line goes from zero to the maximum at the instant the line
comes taut. The likely consequence is a broken line-not unlike how you
might snap a piece of thread with a jerk. Even if the rope is strong enough
not to break, it is hammering cleats and bitts with every surge. Nylon
doesn't come taut suddenly, but dissipates the load by stretching. It is
like the difference between hitting the steering wheel or hitting the air
bag.
As for nylon's resistance to ultraviolet damage, docklines-particularly
permanent docklines-live in the sun. Nylon lines enjoy a much longer life
than other lines in that environment.
Nylon actually has a fourth appealing characteristic that you will
surely appreciate: it is less expensive. The only exception is polypropylene.
What about polypropylene?
Polypropylene rope is stiff, very slick, and usually bright yellow,
but its most distinguishing characteristic is that it floats. You will
be familiar with this rope if you waterski. Polypropylene has a relatively
low breaking strength, the quality of the rope is notoriously erratic,
and because it is so slick, it does not hold a splice. Nevertheless, some
boaters use polypropylene rope for docklines, presumably because it is cheap.
This is false economy. Polypropylene suffers badly in sunlight, losing
much of its strength in as little as a year. Leave polypropylene to the
skiers.
Braid or Three-strand?
Nylon rope is available in both braided and three-strand twist construction.
Each has its advantages.
Braided line looks "dressy." It has better abrasion resistance than
three-strand, and typically it is slightly stronger. Braided line can be
a good choice for tying up in your home dock, but because braided lines
have a tendency to snag on rough pilings, I don't like braid for traveling
docklines. (As anchor line, however, braided nylon handles easier and stows
more compactly and with less of a tendency to tangle, but at the cost of
some elasticity.)
The main advantages of three-strand nylon for docklines are that
it doesn't snag, it is easy to splice, and it is considerably less costly
than braided rope. Three-strand also has the significant advantage of being
stretchier than braid. As a practical choice for docklines, three-strand
nylon is unbeatable, and how often is the best also the least expensive?
What size?
Since larger diameter line takes longer to chafe through, a case
might be made for selecting the largest diameter that will fit your cleats.
But as the line diameter gets larger, it also becomes less elastic-making
the "right" line diameter a bit of a Catch-22. The line diameters shown
in the chart should deliver both sufficient strength and the beneficial
effects of elasticity.
Line Diameter Boat Length
3/8" up to 25'
1/2" up to 35'
5/8" up to 45'
3/4" up to 55'
7/8" up to 65'
What length?
For docklines that are a fixture of your permanent slip, work out
the appropriate lengths using old line or light stuff (flag halyard)-making
allowances for eye splices-then make up your new lines to those lengths.
Nothing is more convenient than pulling into your slip and simply dropping
eyes over the mooring cleats. If your dock is fixed-not floating-be sure
to leave a little extra length for unusually high or low tides.
For a set of docklines that travel with the boat, I like lines equal
to the length of the boat. It is essential for spring lines to be this
long. You can get away with shorter bow and stern lines, but I don't like
to sort through my docklines to place a short one here and a long one there.
In a rush, I can grab the one on top and know that it will be long enough.
The inconvenience of a line that is too long is far less than one that is
too short.
Eye splice
All docklines should have an eye splice in one end. For permanent
docklines, the eye will be in the boat end of the line, and it should
be just large enough to fit over the horns of the boat's mooring cleats.
A small eye will be unlikely to come loose, but for complete security you
can feed the eye under an open-based cleat before looping it back over the
horns.
The eye on transient docklines generally goes ashore so you can adjust
the lie of the boat from on board. Twelve inches is a good eye size,
making it easy to pull the line through the eye to form a loop.
A knot, by the way, is a poor substitute for a proper splice. A bowline,
for example, reduces the breaking strength of a line by about 40% while
a splice retains 95% of the rope's strength.
Chafe protection
Dockline failures are almost always a result of chafe. Unfortunately,
it is nearly impossible to rig docklines so that they never rub against
the dock or the boat. Protect your investment-the docklines and the boat-by
sliding a foot or two of heavy-duty hose over each line and tying it in
position to take the abrasion.
For more information about rope and rigging, consult Good Old Boat by Don Casey.